Categories

System hiccups and false alarms can be aggravating, and even more concerning, might prevent your home security system from working how it should. Thankfully, most problems, from dead batteries to false alarms, are simple to fix. Explore our tips for troubleshooting your home alarm system in Burlington. We’ll help you keep your family members protected and your system operating as it should.

Test Your Home Security System In Burlington

One sensible way to troubleshoot your home’s security is to test it yourself! The latest systems permit you to put them in test mode to prevent you from initiating an emergency response from monitoring agents. After moving to test mode, take these steps:

• Arm your system as you would when leaving.
• Open a door or window that uses a contact sensor, or test other sensors. Shut the window or door so it doesn’t trigger the alarm when you get out of test mode.
• Permit the alarm to resonate for 60 seconds to ensure communications with the security company and to create an entry in the alarm activity log.
• Proceed to test sensors as you wish
• Inspect the systems’s activity log to verify proper function.

Rest assured, monitoring agents can tell that your system is involved in a test. Just make sure to switch out of test mode when you’re done. It’s wise to test monthly or anytime you adjust your home’s phone or internet connectivity.

Inspect The Placement And State Of Motion Sensors

Although an essential part of your alarm system, motion detectors are notorious for false alarms. You can help prevent them with a few straightforward troubleshooting steps.

• Do a physical check. Is there something that could shift within the path of the sensor, like a window treatment taken by a breeze?
• Is the sensor covered in dust? Dirt, cobwebs, and debris can cause malfunctions. Check to confirm the face is clean.
• Does the motion detector offer pet immunity you can activate? Some can be configured to disregard pets weighing up to 100 pounds.
• When was the battery last replaced? Low batteries may affect performance or lead to false alarms.
• Is the sensor aimed toward a source of heat? Too much heat from sunlight or a fireplace can cause an alarm.

Keep Batteries Ready And Watch Out For Low Battery Notifications

One of the great advantages of modern home security systems is that they’ll tell you when batteries are getting low. If your system is equipped with a smartphone app or control panel, you’ll usually see messages there. Depending on the alarm, you could notice an occasional beep when batteries are running out. 

Contact sensors, smoke detectors, motion sensors, and other wireless components have batteries that will have to be replaced every so often. It’s a good idea to keep batteries around and create a replacement schedule. Many systems also include a backup battery for the central control panel. This backup battery helps keep your system operating if you lose power and should recharge once the electricity is working again. If it doesn’t recharge, you should replace it.

Troubleshooting Is Simple With ADT Home Security In Burlington 

As the foremost name in home security, ADT creates systems that provide superior protection and functionality. Accessing test mode is simple through the ADT+ app or MyADT.com, and you’ll always receive alerts when a battery is running low. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system perfect for your Burlington home. Place a call to (802) 242-6460 or complete our form today!